Centimeters 5. Decimeters 6. In the previous example, the drawing is in centimeters. Plotting from model space If needed, switch to the Model tab. Set the other plot options as needed. Page size. Drawing orientation. Plot style table. Plot offset. Other plot options.
In the Plot area section, choose the desired option from the drop-down list. If Window has been chosen, proceed with selecting the plot window from the model space.
In the Plot scale section, deselect Fit to paper. Select the plot scale by doing either of the following procedures. Choose one of the default scales from the Scale drop-down menu.
Enter the desired values in the two text boxes, where the top one describes the paper units and the bottom one describes the model units. Select the dimension style you will be using, and click Modify. In the Fit tab, set the Dimension Scale to 1. In the Primary Units tab, set the Measurement Scale to 1. Hit Enter. Grid your reference and enlarge or decrease the ratio to draw a grid on your paper. Copy each box in proportion.
Measure two points with scale dividers, the reverse end will mark those same points on a different scale. Enlarge a photocopy to size, shade the reverse side, flip it over and trace the outline. AutoCAD 2D drawings are commonly drawn in model space at a scale full-size.
In other words, a foot wall is drawn at that size. Enter the scale factor or specify the Reference option to enter a reference length and a new length. Firstly, If you use 3D with traditional floating paper-space viewports, dimensioning in paper space is the only reliable way. So when reading this scale, 1 unit is the equivalent and equal to units. The scale factor is the ratio of the length of a side of one figure to the length of the corresponding side of the other figure. So, the scale factor is 4.
Originally Answered: lines or anything drawn in autocad are seen so small. Now you are goo to go. If it is still small for you , you can zoom right into it. People also ask: When did autocad introduce paper space?
0コメント